| Quick facts | Answer |
|---|---|
| Cost range | About $120 to $500 for ordinary residential work |
| Time | Many small-to-medium jobs take roughly 1 to 2 hours |
| Who's qualified | Pool work of $5,000 or more requires an Alabama general contractor license |
Harvest, AL: what's different here
Harvest is in Madison County, about 15 miles and roughly 20 minutes from Huntsville via AL-53. The area sits on Bama soils with loamy subsoils over limestone valleys, on gently sloping hills around 700 to 800 feet above sea level. Summers are hot and humid, with an average July high of 89.4 degrees. With about 57.51 inches of rain a year, wet ground can sometimes affect grinding access and cleanup.
Why stump removal for pool installation matters before excavation
A stump and its roots can interfere with excavation and the pool shell or plumbing layout. For pool work, grinding is commonly done deeper than ordinary landscape jobs. One source recommends 12 to 14 inches below grade, and deeper construction grinding can go 18 to 24 inches below grade.
How stump grinding is priced in Harvest
A commonly reported rate is about $2 to $5 per diameter inch. Typical stump-grinding jobs run between $131 and $438, averaging around $250. For Harvest, a practical planning range is about $120 to $500 for ordinary professional residential work.
Who needs an Alabama pool contractor license
Alabama covers swimming pool construction at $5,000 or more under the general contractor licensing law. Subcontractors on those $5,000 pool contracts working under a licensed prime contractor must also be licensed by the General Contractors Board. Verify licenses through the Alabama Licensing Board for General Contractors.
What Harvest soil and weather mean for stump grinding
Harvest sits on Bama soil series with loamy subsoils typical of Madison County's limestone valleys, and the area gets about 57.51 inches of rain a year. Wet soil can affect access and cleanup. The town has gently sloping hills under 10% grades, which is fairly easy ground for grinding equipment.
What to do next
- Measure each stump's diameter so you can check a $2 to $5 per-inch quote.
- Tell the pro the grind must go 12 to 14 inches below grade, or deeper (18 to 24 inches) for pool excavation.
- Verify your pool contractor's license on the Alabama Licensing Board for General Contractors website, since pools of $5,000 or more require it.
- Ask whether cleanup and fill dirt are included in the written quote.
- Call (256) 578-4701 or email [email protected] for a free quote from an independent, insured stump grinding pro.
HSV Stump Guy is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
